Showing posts with label HDL. Show all posts
Showing posts with label HDL. Show all posts

Friday, July 3, 2015

FPGA Design and Verilog HDL Projects List

1.      FPGA implementation of LDPC bit-flipping algorithm using Co-simulation.
2.      FPGA implementation of LDPC Decoder using min-sum algorithm.
3.      Implementation of AES for image encryption and decryption.
4.      Development and verification of SPI protocol.
5.      Development and verification of PPI protocol.
6.      Audio processing using digital filter using Co-simulation.
7.      Design of single precision (32-bit) Floating point ALU.
8.      Design and implementation of the 128-point FFT processor.
9.      Design and implementation of 16bit RISC Processor.
10.    FPGA implementation of the 12-bit Ternary multiplier.
11.    Design of ECG signal processing and denoising using co-simulation.
12.    Design of low power test pattern generator.
13.    A BIST TPG for Low Power Dissipation and High Fault Coverage
14.    Low-Transition LFSR for BIST-Based Applications
15.    Verilog Implementation of UART with BIST capability
16.    Verilog implementation of RSA cryptography algorithm.
17.    Verilog implementation of 64, 32, 16 and 8 bit CSA.
18.    Design of low power TPG using LP_LFSR for fault coverage.
19.    Design and implementation of the 32-point FFT processor by Folding Transform.
20.    FPGA implementation of the REDEYE detection and correction.
21.    FPGA implementation JPEG 2000 using 2-D DWT .
22.    Hardware implementation JPEG 2000 using DWT.
23.    Hardware implementation of the H.264 encoder for HD Video.
24.    Hardware implementation of the MPEG encoder.
25.    FPGA implementation of Quantization algorithms for multi standard video platform.
26.    FPGA implementation of the motion object detection based on background subtraction.
27.    FPGA implementation of the AES algorithm for reduced cycles.
28.    Design and implementation of the MRI image enhancement and denoising.
29.    Hardware implementation of the ECG (Arrhythmia).
30.    Fault tolerant deflecting router with high fault coverage for ON-Chip network.
31.    BIST implementation of the UART.
32.    Orientation field estimation for the fingerprint enhancement.
33.    Verilog implementation of Reconfigurable router (NOC).
34.    Verilog implementation of Decimal to binary conversion.
35.    Verilog implementation of 3D-DWT.

If you need any suggestion or research guidance for FPGA design & verilog HDL projects then feel free to contact us.

Monday, March 2, 2015

Digital Signal Processing on FPGA


Digital signal processing is the most challenging field of research. It has replaced the conventional analog signal processing with an advantage of low error probability and high SNR. Digital signal processing adds high speed processing capabilities to the system with an overhead of analog to digital and digital to analog conversions. FPGA (field programming gate array) has bough revolution in signal processing system development due to its parallel implementation capabilities with throughput in multiple Gigabits/sec.


Signal Processing Projects


FPGAs are best suited not only for combination or sequential logic implementation; these are optimum for high speed signal processing as well. PhD or M.Tech scholars can carry their research in DSP a step further by implementing their designs in real time using DSP oriented FPGAs. The DSP slices and dedicated blocks on FPGA accelerate performance of FPGAs and makes system development easy and accurate.

A brief idea of design flow used for DSP system is:


  •          system modeling on Simulink
  •          simulation (with floating point data)
  •          Data type conversion (to fixed point)
  •          Hardware implementation and simulation


System modeling is the first step in design of system where behavioral blocks, transforms, delay elements etc. are used to model the Digital Signal Processing system which is then verified for desired performance. Till now the data types used are of floating point precision. To implement this on hardware we need to convert this system to work on fixed point data types so that the system can be implemented on hardware efficiently. The width of coefficient is quantized and fixed in this process. Now the design is written in HDL and mapped to hardware. The hardware is then simulated to check the performance with quantized coefficients and fixed word lengths. If the performance is satisfactory the design is finalized otherwise the conversion is carried out again.

Monday, September 1, 2014

How to detect and correct faults in NOC ?

The use of system on chip (SOC) has increased exponentially due to high integration of a number of IP on a single chip. The higher number of IP needs higher number of bus based interconnections. The bus based interconnection leads to a parallel communication which is not efficient for bandwidth, latency and power consumption. To solve this problem a switching network is used, called Network On Chip(NOC). The complexity and the technology scale increase the occurrence of intermittent and transient faults.

In order to run a fault-tolerant system smoothly the first thing to be done is to detect the location of the faults. The fault detection mechanism should also be able to distinguish transient faults from permanent faults. In order to detect transient link errors the methods used are error coding techniques viz. cyclic redundancy check (CRC) and parity codes. To detect permanent errors in NoC there is an in-line test method to test each adjacent pair of wires and a syndrome storing-based error detection method based on evaluation of consecutive code syndromes at the receiver and there are also few works focusing on detecting transient faults and permanent faults at the meantime.

There are mainly three techniques to handle transient faults in NoC and they are Automatic repeat request (ARQ), Forward error correction (FEC), and Hybrid ARQ (HARQ). Also transient faults can be handled at both link-level and transport level. In ARQ-based error control, it is found to have errors the packet is retransmitted. They are retransmitted until it is received error free packet. The error detection is usually implemented through a cyclic redundancy check (CRC). For a simple error detecting, the code is applied to the packet before transmitting, and at the receiver side a checksum will be calculated to ensure that no error has occurred. The packet is retransmitted, if the checksum does not add up to the right value.

·         114 bits, contains a 34 bits head and an 80 bits payload. A valid bit (V) is used to mark a packet valid or not. Relative addressing is used for the source and destination address fields (SA and DA) which are 12 bits respectively. The HC field (9 bits) records the number of hops the packet has been routed.
·         No. of input should be equal to the no. of output.
A 2-hop fault information transmission mechanism isused to reduce the average hop counts. In the 2-hop fault information transmission mechanism, four additional signals (fault from[d] (1 bit), fault to[d] (1 bit), FoN from[d] (3bits), FoN to[d] (3 bits)), which are 8 bits in total for each direction of a switch and they are used to transmit fault information. Each switch is not only responsible for transmitting its own link status to four neighbours but also collecting the link status from its three neighbours and transmitting to the fourth neighbour. For example, switch A can get the status of 16 links within 2 hops. 




  Fault information transmission mechanism
The signal FoN to[d] collected by the current switch is a 3-bit vector to denote link status along the other three directions except d and is transmitted to the neighbour along d.

Tags :    HDL                 FPGA                    ASIC                   HSPICE                 VHDL 



                                                                                                         Author- Dharmendra Kumar
(Research Associate at Silicon Mentor)

Wednesday, August 27, 2014

FUNDAMENTAL OF CMOS VLSI DESIGN



Due to the rapid growth in technology there is need of high speed, low power consumption and higher noise immunity.
  
CMOS is the abbreviation of complementary metal oxide semiconductor. CMOS is the combination of PMOS and NMOS. Classical CMOS is represented as shown below.



CMOS




Working of cmos

At one time only one transistor will be ON and other one wil be in OFF state. When input given is low or logic 0 PMOS becomes ON and NMOS will be in cut off region so there is vdd at output.
Similarily when input is logic high NMOS and PMOS will be ON and OFF respectively therefore output will be connected to ground directly and output will become zero.


Significant properties of CMOS in vlsi design

·         Low static power dissipation
Because at one time only one transistor is ON in static state so power consumption is low.   


High noise immunity

Noise tolerance capability of CMOS circuits is good enough so output is correct uptil a particular noise level.
 

Classification of cmos circuit.
 

Classification of CMOS circuit


Application of CMOS technology



               For high performance computing and engineering applications.

              CMOS circuits are highly used to developed RAM chips, microprocessor chips, DSP chips.


              CMOS logic is also used to design  different kind of  logic circuits like  gate, flipflops  etc.







Tags : HDL      VHDL        CMOS            FPGA          ASIC          SPICE              HSPICE





 

 Author- Jyotishna Bansal
(Intern at Silicon Mentor)